Bigfoot
Bigfoot Engine Driven Cold High Pressure Washers
These machines are not homeowner or light duty contractor models as commonly found in retail outlets. They are rugged industrial grade units perfectly suited to the most demanding industrial, commercial and contractor applications. All components are premium heavy duty for reliability and long life.
6 Standard Models: Gasoline Engine Driven or Propane Engine Driven
The Bigfoot Engine Driven series machines are compact and mobile yet powerful cold water engine driven high pressure washers. Five models are available ranging from 2000 PSI (137.9 bar) to 5000 PSI (344.75 bar). Four models are powered by efficient OHV gasoline engines with the 5000 PSI model available with a propane engine.
Cold water high pressure washers are best suited to applications involving the removal of dirt and grime which does not contain substantial amounts of grease or oil. Also, removal of hard deposits benefits from the blasting and cutting effect of high pressure cold water. With the aid of detergent chemical, cold pressure washers can be used for the removal of dirt and grime containing small to moderate amounts of oil and grease. For the purpose, all Bigfoot models are standard equipped with easy to use detergent chemical injection systems. For removing heavy amounts of oil and grease or for softening heat reactive substances, it is usually best to use hot high pressure or steam. See Fury Series, Super Fury Series, Tempest Series or Big Blast Series.
Ruggedly built for the toughest industrial and commercial applications. Compact, easy to use design. Powerful performance and wide ranging versatility.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Direct drive eliminates belts and pulleys, increases efficiency, and reduces maintenance and fuel consumption by 30%. Belt drive optionally available. Some models standard with belt drive.
- Heavy duty industrial grade engines
- Automatic thermal pump protection system
- Chemical injection system is wand controlled for alkaline cleaning solutions
- Trigger gun wand with 25 foot high pressure hose (longer lengths optional)
- Inlet water filter
- Glycerine filled high pressure gauge
- 10″ diameter full pneumatic tires
- Compact design for maximum mobility and removable handles for vehicular transport
- 12 volt engine starting system including battery (Model V)
- Complete set of nozzles, 0, 15, 25, and 40 degrees
- Quick disconnect hose couplers
- Extra strong, double steel, braided pressure hose with hydraulically crimped fittings and quick couplers
- Extra heavy steel frame and vibration isolation system designed to withstand severe use and to provide long service
- Corrosion and chemical resistant powder coating finish on all metal parts
Options Available:
- Extra Length pressure hose assembly with quick couplers
- High speed rotating nozzle
- Wet sandblast system
- Acid application/system
- Alternate PSI and GPM ratings
- Multiple gun capabilities
- Hose reel
- Alternate brand engines
- Propane engine available on Model V
See Product Options for more information.
| Item | Flowrate | Pressure | Engine Power | Engine Type | List Price |
|---|---|---|---|---|---|
| BIGFOOT II | 3.5 GPM 13.200 LPM |
151.684 BAR 2200 PSI |
7.0 H.P. | Gasoline, Manual Start | QUOTE |
| BIGFOOT III A | 4.0 GPM 15.140 LPM |
172.380 BAR 2500 PSI |
9.5 H.P. | Gasoline, Manual Start | QUOTE |
| BIGFOOT IV A | 5.0 GPM 18.9 LPM |
206.850 BAR 3000 PSI |
14 H.P. | Gasoline, Manual Start | QUOTE |
| BIGFOOT V | 4.5 GPM 17.032 LPM |
344.750 BAR 5000 PSI |
21 H.P | Gasoline, Electric Start | QUOTE |
| BIGFOOT IV B | 4.0 GPM 15.140 LPM |
275.800 BAR 4000 PSI |
14.0 H.P. | Gasoline, Manual Start | QUOTE |
Bigfoot Engine Driven Cold High Pressure Washers
Ruggedly built for the toughest industrial and commercial applications. Compact, easy to use design. Powerful performance and wide ranging versatility.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Direct drive eliminates belts and pulleys, increases efficiency, and reduces maintenance and fuel consumption by 30%. Belt drive optionally available. Some models standard with belt drive.
- Heavy duty industrial grade engines
- Automatic thermal pump protection system
- Chemical injection system is wand controlled for alkaline cleaning solutions
- Trigger gun wand with 25 foot high pressure hose (longer lengths optional)
- Inlet water filter
- Glycerine filled high pressure gauge
- 10″ diameter full pneumatic tires
- Compact design for maximum mobility and removable handles for vehicular transport
- 12 volt engine starting system including battery (Model V)
- Complete set of nozzles, 0, 15, 25, and 40 degrees
- Quick disconnect hose couplers
- Extra strong, double steel, braided pressure hose with hydraulically crimped fittings and quick couplers
- Extra heavy steel frame and vibration isolation system designed to withstand severe use and to provide long service
- Corrosion and chemical resistant powder coating finish on all metal parts
Options Available:
- Extra Length pressure hose assembly with quick couplers
- High speed rotating nozzle
- Wet sandblast system
- Acid application/system
- Alternate PSI and GPM ratings
- Multiple gun capabilities
- Hose reel
- Alternate brand engines
- Propane engine available on Model V
Flow Rate |
3.5 GPM 13.200 LPM |
Pressure |
151.684 BAR 2200 PSI |
Drive Type |
Direct Drive Gasoline |
Motor / Engine Power |
7.0 H.P. |
Cold or Hot/Steam |
Cold |
Heating Fuel/Energy Source |
Natural Gas or Propane Fired |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT III A, Cold Pressure Washer – Electric Motor
Ruggedly built for the toughest industrial and commercial applications. Compact, easy to use design. Powerful performance and wide ranging versatility.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Direct drive eliminates belts and pulleys, increases efficiency, and reduces maintenance and fuel consumption by 30%. Belt drive optionally available. Some models standard with belt drive.
- Heavy duty industrial grade engines
- Automatic thermal pump protection system
- Chemical injection system is wand controlled for alkaline cleaning solutions
- Trigger gun wand with 25 foot high pressure hose (longer lengths optional)
- Inlet water filter
- Glycerine filled high pressure gauge
- 10″ diameter full pneumatic tires
- Compact design for maximum mobility and removable handles for vehicular transport
- 12 volt engine starting system including battery (Model V)
- Complete set of nozzles, 0, 15, 25, and 40 degrees
- Quick disconnect hose couplers
- Extra strong, double steel, braided pressure hose with hydraulically crimped fittings and quick couplers
- Extra heavy steel frame and vibration isolation system designed to withstand severe use and to provide long service
- Corrosion and chemical resistant powder coating finish on all metal parts
Options Available:
- Extra Length pressure hose assembly with quick couplers
- High speed rotating nozzle
- Wet sandblast system
- Acid application/system
- Alternate PSI and GPM ratings
- Multiple gun capabilities
- Hose reel
- Alternate brand engines
- Propane engine available on Model V
Flow Rate |
4.0 GPM 15.140 LPM |
Pressure |
172.380 BAR 2500 PSI |
Drive Type |
Direct Drive Gasoline |
Motor / Engine Power |
9.5 H.P. |
Cold or Hot/Steam |
Cold |
Heating Fuel/Energy Source |
Natural Gas or Propane Fired |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT IV A, Cold Pressure Washer – Electric Motor
Ruggedly built for the toughest industrial and commercial applications. Compact, easy to use design. Powerful performance and wide ranging versatility.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Direct drive eliminates belts and pulleys, increases efficiency, and reduces maintenance and fuel consumption by 30%. Belt drive optionally available. Some models standard with belt drive.
- Heavy duty industrial grade engines
- Automatic thermal pump protection system
- Chemical injection system is wand controlled for alkaline cleaning solutions
- Trigger gun wand with 25 foot high pressure hose (longer lengths optional)
- Inlet water filter
- Glycerine filled high pressure gauge
- 10″ diameter full pneumatic tires
- Compact design for maximum mobility and removable handles for vehicular transport
- 12 volt engine starting system including battery (Model V)
- Complete set of nozzles, 0, 15, 25, and 40 degrees
- Quick disconnect hose couplers
- Extra strong, double steel, braided pressure hose with hydraulically crimped fittings and quick couplers
- Extra heavy steel frame and vibration isolation system designed to withstand severe use and to provide long service
- Corrosion and chemical resistant powder coating finish on all metal parts
Options Available:
- Extra Length pressure hose assembly with quick couplers
- High speed rotating nozzle
- Wet sandblast system
- Acid application/system
- Alternate PSI and GPM ratings
- Multiple gun capabilities
- Hose reel
- Alternate brand engines
- Propane engine available on Model V
Flow Rate |
5.0 GPM 18.9 LPM |
Pressure |
206.850 BAR 3000 PSI |
Drive Type |
Direct Drive Gasoline |
Motor / Engine Power |
14 H.P. |
Cold or Hot/Steam |
Cold |
Heating Fuel/Energy Source |
Natural Gas or Propane Fired |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT IV B, Cold Pressure Washer – Engine Driven
Ruggedly built for the toughest industrial and commercial applications. Compact, easy to use design. Powerful performance and wide ranging versatility.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Direct drive eliminates belts and pulleys, increases efficiency, and reduces maintenance and fuel consumption by 30%. Belt drive optionally available. Some models standard with belt drive.
- Heavy duty industrial grade engines
- Automatic thermal pump protection system
- Chemical injection system is wand controlled for alkaline cleaning solutions
- Trigger gun wand with 25 foot high pressure hose (longer lengths optional)
- Inlet water filter
- Glycerine filled high pressure gauge
- 10″ diameter full pneumatic tires
- Compact design for maximum mobility and removable handles for vehicular transport
- 12 volt engine starting system including battery (Model V)
- Complete set of nozzles, 0, 15, 25, and 40 degrees
- Quick disconnect hose couplers
- Extra strong, double steel, braided pressure hose with hydraulically crimped fittings and quick couplers
- Extra heavy steel frame and vibration isolation system designed to withstand severe use and to provide long service
- Corrosion and chemical resistant powder coating finish on all metal parts
Options Available:
- Extra Length pressure hose assembly with quick couplers
- High speed rotating nozzle
- Wet sandblast system
- Acid application/system
- Alternate PSI and GPM ratings
- Multiple gun capabilities
- Hose reel
- Alternate brand engines
- Propane engine available on Model V
Flow Rate |
4.0 GPM 15.140 LPM |
Pressure |
275.800 BAR 4000 PSI |
Drive Type |
Direct Drive Gasoline |
Motor / Engine Power |
14.0 H.P. |
Cold or Hot/Steam |
Cold |
Heating Fuel/Energy Source |
Natural Gas or Propane Fired |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT V, Cold Pressure Washer – Electric Motor
Ruggedly built for the toughest industrial and commercial applications. Compact, easy to use design. Powerful performance and wide ranging versatility.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Direct drive eliminates belts and pulleys, increases efficiency, and reduces maintenance and fuel consumption by 30%. Belt drive optionally available. Some models standard with belt drive.
- Heavy duty industrial grade engines
- Automatic thermal pump protection system
- Chemical injection system is wand controlled for alkaline cleaning solutions
- Trigger gun wand with 25 foot high pressure hose (longer lengths optional)
- Inlet water filter
- Glycerine filled high pressure gauge
- 10″ diameter full pneumatic tires
- Compact design for maximum mobility and removable handles for vehicular transport
- 12 volt engine starting system including battery (Model V)
- Complete set of nozzles, 0, 15, 25, and 40 degrees
- Quick disconnect hose couplers
- Extra strong, double steel, braided pressure hose with hydraulically crimped fittings and quick couplers
- Extra heavy steel frame and vibration isolation system designed to withstand severe use and to provide long service
- Corrosion and chemical resistant powder coating finish on all metal parts
Options Available:
- Extra Length pressure hose assembly with quick couplers
- High speed rotating nozzle
- Wet sandblast system
- Acid application/system
- Alternate PSI and GPM ratings
- Multiple gun capabilities
- Hose reel
- Alternate brand engines
- Propane engine available on Model V
Flow Rate |
4.5 GPM 17.032 LPM |
Pressure |
344.750 BAR 5000 PSI |
Drive Type |
Belt Drive Gasoline |
Motor / Engine Power |
21 H.P |
Cold or Hot/Steam |
Cold |
Heating Fuel/Energy Source |
Natural Gas or Propane Fired |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Bigfoot-E Series Electric Motor Cold High Pressure Washers
10 Standard Models from 1.5 H.P to 30 H.P.
The Bigfoot-E series are powerful, rugged industrial duty cold high pressure washers that are designed and built for the most demanding industrial and commercial applications. All components are premium heavy duty for reliability and long life. Ten standard models are available ranging from 1500 PSI (103.4 bar) to 5000 PSI (344.7 bar) with flow rates from 3 GPM (11.3 PLM) to 5 GPM (18.9 LPM). All models are on wheels for mobility, but are also optionally available with stationary mount frames and/or wall mounting.
Bigfoot-E series machines can be equipped with multiple guns, remote control stations, special automatic controls and many other optional features. Go to Product Options for more information
Bigfoot-E series machines can also be used with demand heater modules for hot high pressure heater modules for hot high pressure washing or steam cleaning. Go to Demand Heater Modules for more information. If your initial requirements are for cold high pressure cleaning with possible later converting to hot high pressure or steam cleaning, starting with a Bigfoot-E series machine and later adding a demand heater module is a very cost efficient way to go.
Bigfoot-E series machines are frequently used in industrial process applications like supplying fixed nozzles mounted on a conveyer to clean manufactured products or components traveling on a conveyor line. Remote control signals from production can be used. These machines are capable of continuous duty, even 24/7 use.
Bigfoot-E machines can be specified and quoted for special flow rates and pressure for virtually any application. For more information go to Custom Designed Cleaning Systems.
Cold water high pressure washers are best suited to applications involving the removal of dirt and grime which does not contain substantial amounts of grease or oil. Also removal of hard deposits benefits from the blasting and cutting effect of high pressure cold water. With the aid of detergent chemical, cold pressure washers can be used for removal of dirt and grime containing small to moderate amounts of oil and grease. For the purpose, all Bigfoot models are standard equipped with easy to use detergent chemical injection systems. For removing heavy amounts of oil and grease or for softening heat reactive substances, it is usually best to use hot pressure/steam. See Fury Series, Super Fury Series, Tempest Series or Big Blast Series.
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
See Product Options for more information.
| Item | Flowrate | Pressure | Drive Type | Voltage/Phase | Motor/Engine Power |
|---|---|---|---|---|---|
| BIGFOOT I E | 3.0 GPM 11.355 LPM |
103.420 BAR 1500 PSI |
Electric Motor | 230 V / 1Ph | 3.0 H.P. |
| BIGFOOT II EA | 4.0 GPM 15.140 LPM |
137.900 BAR 2000 PSI |
Electric Motor | 230 V / 1Ph | 5.0 H.P. |
| BIGFOOT II EB | 4.0 GPM 15.140 LPM |
137.900 BAR 2000 PSI |
Electric Motor | 230 V / 3Ph | 5.0 H.P. |
| BIGFOOT II EC | 4.0 GPM 15.140 LPM |
137.900 BAR 2000 PSI |
Electric Motor | 440 V / 3Ph | 5.0 H.P. |
| BIGFOOT III EA | 4.0 GPM 15.140 LPM |
172.380 BAR 2500 PSI |
Electric Motor | 230 V / 3Ph | 7.5 H.P. |
| BIGFOOT III EB | 4.0 GPM 15.140 LPM |
172.380 BAR 2500 PSI |
Electric Motor | 440 V / 3Ph | 7.5 H.P. |
| BIGFOOT IV EA | 5.0 GPM 18.925 LPM |
206.850 BAR 3000 PSI |
Electric Motor | 230 V / 3Ph | 10 H.P. |
| BIGFOOT IV EB | 5.0 GPM 18.925 LPM |
206.850 BAR 3000 PSI |
Electric Motor | 440 V / 3Ph | 10 H.P. |
| BIGFOOT V E | 4.0 GPM 15.140 LPM |
275.800 BAR 4000 PSI |
Electric Motor | 440 V / 3Ph | 15 H.P. |
| BIGFOOT VI E | 5.0 GPM 18.925 LPM |
344.750 BAR 5000 PSI |
Electric Motor | 440 V / 3Ph | 20 H.P. |
Item # BIGFOOT I E, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
3.0 GPM 11.355 LPM |
Pressure |
103.420 BAR 1500 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
230 V / 1Ph |
Motor / Engine Power |
3.0 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT I EA, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
4.0 GPM 15.140 LPM |
Pressure |
137.900 BAR 2000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
230 V / 1Ph |
Motor / Engine Power |
5.0 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT II EB, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
4.0 GPM 15.140 LPM |
Pressure |
137.900 BAR 2000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
230 V / 3Ph |
Motor / Engine Power |
5 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT II EC, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
4.0 GPM 15.140 LPM |
Pressure |
137.900 BAR 2000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
440 V / 3Ph |
Motor / Engine Power |
5.0 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT II EC, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
4.0 GPM 15.140 LPM |
Pressure |
172.380 BAR 2500 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
230 V / 3Ph |
Motor / Engine Power |
7.5 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT III EB, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
4.0 GPM 15.140 LPM |
Pressure |
172.380 BAR 2500 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
440 V / 3Ph |
Motor / Engine Power |
7.5 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT IV EA, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
5.0 GPM 18.925 LPM |
Pressure |
206.850 BAR 3000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
230 V / 3Ph |
Motor / Engine Power |
10 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT IV EB, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
5.0 GPM 18.925 LPM |
Pressure |
206.850 BAR 3000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
440 V / 3Ph |
Motor / Engine Power |
10 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT V E, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
4.0 GPM 15.140 LPM |
Pressure |
275.800 BAR 4000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
440 V / 3Ph |
Motor / Engine Power |
15 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |
Item # BIGFOOT VI E, Cold Pressure Washer – Electric Motor
For the ultimate in self-contained high pressure cold water washing.
Industrial quality for top performance and long life.
Standard Features:
- Enormous cleaning power and impressive performance
- Rugged quality construction
- Heavy duty ball-bearing motors
- Built-in motor starter, 5 HP and larger
- Smooth running ceramic plunger Triplex pumps
- Adjustable pressure control
- Efficient chemical injection system controlled at wand
- Glycerine filled pressure gauge
- Heavy duty trigger gun
- 25 foot long high pressure hose with swivels and quick coupler
- Pneumatic tires
- Built-in water filter
- Extremely compact and portable cart-mounted design
- Smooth, quiet vibration-free operation
- Chemical-proof powder coating
- Low maintenance design
Options Available:
- Explosion proof design
- Extra length pressure hose
- Special length wands
- 3 Phase electrical system (Standard on some models)
- 50 HZ electrical system
- Wet sandblast system
- Automatic motor shutdown with time delay
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
- Stationary mounting or wall mounting
- Multiple guns
- Remote stations
Flow Rate |
5.0 GPM 18.925 LPM |
Pressure |
344.750 BAR 5000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
440 V / 3Ph |
Motor / Engine Power |
20 H.P. |
Cold or Hot/Steam |
Cold |
Major Options |
|
Warranty |
Certificate of Limited Warranty |