Super Fury Series
Super Fury Propane-Fired Hot High Pressure Washers (Steam Optional)
6 Standard Models: 3 Electric Motor driven, 3 Engine driven
Super Fury series machines are the big brothers of the Fury series. With six models ranging from 2000 PSI (137.9 bar) to 4000 PSI (275.8 bar), these powerful units will handle the toughest and most demanding hot pressure cleaning or steam cleaning tasks with ease. They are equipped with advanced electronic DSI ignitions and control systems with full safety controls and full time burner supervision. All components are premium heavy duty for reliability and long life.
Of the six standard models, three feature premium efficient electric motor drives and three are powered by specially designed heavy duty electric start propane or gasoline fueled engines.
Super Fury machines are ideally suited and widely used for challenging industrial uses and contractor applications. Optional multiple guns can be used and special controls are available. Phosphatizing and acid injection optional features are available, as well as custom ratings of flow rate and pressure.
Super powered, propane fueled, high pressure washers for the toughest and most demanding applications. Uses clean-burning propane or butane (L.P.G.) fuel. Two- or three-mode operation – cold high pressure and hot high pressure standard. Steam is optional.
Industrial quality for rugged dependability and long life
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Heavy duty American NEMA standard motors
- Maintenance free, multi-orifice natural draft burners
- Automatic electronic direct spark ignition and control system with full burner supervision and safety controls
- Heavy duty schedule 80 ASTM A-53 heating coil
- Automatic detergent injection system
- Low maintenance design
- Includes portable propane tanks with pressure regulators
- 6″ solid polyolefin caster type wheels
- 50 feet of 3/8″ high pressure hose with trigger gun standard on all models
- Heavy gage steel frame finished with oven baked powder coating for maximum corrosion resistance
- Sophisticated vibration isolation system on engine driven models
Options Available:
- Extra length pressure hose assembly with quick couplers
- Special length wands
- Factory certified propane fueled engine (Model II GA-P and III GA-P)
- Steam cleaning capability
- Thermostat control
- Three phase electrical system (optional on Model SFIEA, standard on SFIIEA and SFIIIEA)
- 50 HZ electrical system (Models SFIEA, SFIIEA and SFIIIEA)
- Wet sandblast system
- Phosphatizing system
- Automatic motor shutdown system with time delay (Models SFIEA, SFIIEA and SFIIIEA)
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
See Product Options for more information.
Item # SUPER FURY IEA, Hot Pressure Washer – Propane
Super powered, propane fueled, high pressure washers for the toughest and most demanding applications. Uses clean-burning propane or butane (L.P.G.) fuel. Two- or three-mode operation – cold high pressure and hot high pressure standard. Steam is optional.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Heavy duty American NEMA standard motors
- Maintenance free, multi-orifice natural draft burners
- Automatic electronic direct spark ignition and control system with full burner supervision and safety controls
- Heavy duty schedule 80 ASTM A-53 heating coil
- Automatic detergent injection system
- Low maintenance design
- Includes portable propane tanks with pressure regulators
- 6″ solid polyolefin caster type wheels
- 50 feet of 3/8″ high pressure hose with trigger gun standard on all models
- Heavy gage steel frame finished with oven baked powder coating for maximum corrosion resistance
- Sophisticated vibration isolation system on engine driven models
Options Available:
- Extra length pressure hose assembly with quick couplers
- Special length wands
- Steam cleaning capability
- Thermostat control
- Three phase electrical system (optional on Model SFIEA, standard on SFIIEA and SFIIIEA)
- 50 HZ electrical system (Models SFIEA, SFIIEA and SFIIIEA)
- Wet sandblast system
- Phosphatizing system
- Automatic motor shutdown system with time delay (Models SFIEA, SFIIEA and SFIIIEA)
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
Flow Rate |
4.0 GPM 15.1400 LPM |
Pressure |
137.900 BAR 2000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
230 V / 1 Ph |
Motor / Engine Power |
5.0 H.P. |
Heat Exchanger Coil |
Stainless Steel Coils Standard. |
Cold or Hot/Steam |
Hot Water/Steam |
Heating Fuel/Energy Source |
Propane Fired |
Options |
|
Warranty |
Certificate of Limited Warranty |
Item # SUPER FURY IIEA, Hot Pressure Washer – Propane
3 Standard Models: 2 Electric Motor Driven, 1 Engine Driven
Super powered, propane fueled, high pressure washers for the toughest and most demanding applications. Uses clean-burning propane or butane (L.P.G.) fuel. Two- or three-mode operation – cold high pressure and hot high pressure standard. Steam is optional.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Heavy duty American NEMA standard motors
- Maintenance free, multi-orifice natural draft burners
- Automatic electronic direct spark ignition and control system with full burner supervision and safety controls
- Heavy duty schedule 80 ASTM A-53 heating coil
- Automatic detergent injection system
- Low maintenance design
- Includes portable propane tanks with pressure regulators
- 6″ solid polyolefin caster type wheels
- 50 feet of 3/8″ high pressure hose with trigger gun standard on all models
- Heavy gage steel frame finished with oven baked powder coating for maximum corrosion resistance
- Sophisticated vibration isolation system on engine driven models
Options Available:
- Extra length pressure hose assembly with quick couplers
- Special length wands
- Factory certified propane fueled engine (Model SF II GN-P and SF III GA-P)
- Steam cleaning capability
- Thermostat control
- Three phase electrical system (optional on Model SFIEA, standard on SFIIEA and SFIIIEA)
- 50 HZ electrical system (Models SFIEA, SFIIEA and SFIIIEA)
- Wet sandblast system
- Phosphatizing system
- Automatic motor shutdown system with time delay (Models SFIEA, SFIIEA and SFIIIEA)
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
Flow Rate |
5.0 GPM 18.9250 LPM |
Pressure |
206.850 BAR 3000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
230-440 V / 3 Ph |
Motor / Engine Power |
10.0 H.P. |
Heat Exchanger Coil |
Stainless Steel Coils Standard. |
Cold or Hot/Steam |
Hot Water/Steam |
Heating Fuel/Energy Source |
Propane Fired |
Options |
|
Warranty |
Certificate of Limited Warranty |
Item # SUPER FURY IIIGA-P, Hot Pressure Washer – Propane
Super powered, propane fueled, high pressure washers for the toughest and most demanding applications. Uses clean-burning propane or butane (L.P.G.) fuel. Two- or three-mode operation – cold high pressure and hot high pressure standard. Steam is optional.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Heavy duty American NEMA standard motors
- Maintenance free, multi-orifice natural draft burners
- Automatic electronic direct spark ignition and control system with full burner supervision and safety controls
- Heavy duty schedule 80 ASTM A-53 heating coil
- Automatic detergent injection system
- Low maintenance design
- Includes portable propane tanks with pressure regulators
- 6″ solid polyolefin caster type wheels
- 50 feet of 3/8″ high pressure hose with trigger gun standard on all models
- Heavy gage steel frame finished with oven baked powder coating for maximum corrosion resistance
- Sophisticated vibration isolation system on engine driven models
Options Available:
- Extra length pressure hose assembly with quick couplers
- Special length wands
- Steam cleaning capability
- Thermostat control
- Three phase electrical system (optional on Model SFIEA, standard on SFIIEA and SFIIIEA)
- 50 HZ electrical system (Models SFIEA, SFIIEA and SFIIIEA)
- Wet sandblast system
- Phosphatizing system
- Automatic motor shutdown system with time delay (Models SFIEA, SFIIEA and SFIIIEA)
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
Flow Rate |
5.0 GPM 18.9250 LPM |
Pressure |
275.800 BAR 4000 PSI |
Drive Type |
Electric Motor |
Voltage / Phase |
230-440 V / 3 Ph |
Motor / Engine Power |
15.0 H.P. |
Heat Exchanger Coil |
Stainless Steel Coils Standard. |
Cold or Hot/Steam |
Hot Water/Steam |
Heating Fuel/Energy Source |
Propane Fired |
Options |
|
Warranty |
Certificate of Limited Warranty |
Item # SUPER FURY IIGA, Hot Pressure Washer – Propane
Super powered, propane fueled, high pressure washers for the toughest and most demanding applications. Uses clean-burning propane or butane (L.P.G.) fuel. Two- or three-mode operation – cold high pressure and hot high pressure standard. Steam is optional.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Heavy duty American NEMA standard motors or OHV industrial engines, gasoline or propane
- Maintenance free, multi-orifice natural draft burners
- Automatic electronic direct spark ignition and control system with full burner supervision and safety controls
- Heavy duty schedule 80 ASTM A-53 heating coil
- Automatic detergent injection system
- Low maintenance design
- Includes portable propane tanks with pressure regulators
- 6″ solid polyolefin caster type wheels
- 50 feet of 3/8″ high pressure hose with trigger gun standard on all models
- Engine driven units are equipped with 12 volt electric starting systems including battery
- Heavy gage steel frame finished with oven baked powder coating for maximum corrosion resistance
- Sophisticated vibration isolation system on engine driven models
Options Available:
- Extra length pressure hose assembly with quick couplers
- Special length wands
- Factory certified propane fueled engine (II GA-P and III GA-P)
- Steam cleaning capability
- Thermostat control
- Three phase electrical system (optional on Model SFIEA, standard on SFIIEA and SFIIIEA)
- 50 HZ electrical system (Models SFIEA, SFIIEA and SFIIIEA)
- Wet sandblast system
- Phosphatizing system
- Automatic motor shutdown system with time delay (Models SFIEA, SFIIEA and SFIIIEA)
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
Flow Rate |
5.0 GPM 18.9250 LPM |
Pressure |
206.850 BAR 3000 PSI |
Drive Type |
Propane Engine |
Voltage / Phase |
Propane Engine |
Motor / Engine Power |
25.0 H.P. |
Heat Exchanger Coil |
Stainless Steel Coils Standard. |
Cold or Hot/Steam |
Hot Water/Steam |
Heating Fuel/Energy Source |
Propane Fired |
Options |
|
Warranty |
Certificate of Limited Warranty |
Item # SUPER FURY IIIEA, Hot Pressure Washer – Propane
Super powered, propane fueled, high pressure washers for the toughest and most demanding applications. Uses clean-burning propane or butane (L.P.G.) fuel. Two- or three-mode operation – cold high pressure and hot high pressure standard. Steam is optional.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Heavy duty American NEMA standard motors or OHV industrial engines, gasoline or propane
- Maintenance free, multi-orifice natural draft burners
- Automatic electronic direct spark ignition and control system with full burner supervision and safety controls
- Heavy duty schedule 80 ASTM A-53 heating coil
- Automatic detergent injection system
- Low maintenance design
- Includes portable propane tanks with pressure regulators
- 6″ solid polyolefin caster type wheels
- 50 feet of 3/8″ high pressure hose with trigger gun standard on all models
- Heavy gage steel frame finished with oven baked powder coating for maximum corrosion resistance
- Sophisticated vibration isolation system on engine driven models
Options Available:
- Extra length pressure hose assembly with quick couplers
- Special length wands
- Factory certified propane fueled engine (Model SFIIGA only)
- Steam cleaning capability
- Thermostat control
- Three phase electrical system (optional on Model SFIEA, standard on SFIIEA and SFIIIEA)
- 50 HZ electrical system (Models SFIEA, SFIIEA and SFIIIEA)
- Wet sandblast system
- Phosphatizing system
- Automatic motor shutdown system with time delay (Models SFIEA, SFIIEA and SFIIIEA)
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
Flow Rate |
5.0 GPM 18.9250 LPM |
Pressure |
– |
Drive Type |
Propane Engine |
Voltage / Phase |
Propane Engine |
Motor / Engine Power |
– |
Heat Exchanger Coil |
Stainless Steel Coils Standard. |
Cold or Hot/Steam |
Hot Water/Steam |
Heating Fuel/Energy Source |
Propane Fired |
Options |
|
Warranty |
Certificate of Limited Warranty |
Item # SUPER FURY IIGA, Hot Pressure Washer – Propane
Super powered, propane fueled, high pressure washers for the toughest and most demanding applications. Uses clean-burning propane or butane (L.P.G.) fuel. Two- or three-mode operation – cold high pressure and hot high pressure standard. Steam is optional.
Standard Features:
- Triplex ceramic plunger oil bath pumps
- Heavy duty American NEMA standard motors or OHV industrial engines, gasoline or propane
- Maintenance free, multi-orifice natural draft burners
- Automatic electronic direct spark ignition and control system with full burner supervision and safety controls
- Heavy duty schedule 80 ASTM A-53 heating coil
- Automatic detergent injection system
- Low maintenance design
- Includes portable propane tanks with pressure regulators
- 6″ solid polyolefin caster type wheels
- 50 feet of 3/8″ high pressure hose with trigger gun standard on all models
- Engine driven units are equipped with 12 volt electric starting systems including battery
- Heavy gage steel frame finished with oven baked powder coating for maximum corrosion resistance
- Sophisticated vibration isolation system on engine driven models
Options Available:
- Extra length pressure hose assembly with quick couplers
- Special length wands
- Factory certified propane fueled engine (II GA-P and III GA-P)
- Steam cleaning capability
- Thermostat control
- Three phase electrical system (optional on Model SFIEA, standard on SFIIEA and SFIIIEA)
- 50 HZ electrical system (Models SFIEA, SFIIEA and SFIIIEA
- Wet sandblast system
- Phosphatizing system
- Automatic motor shutdown system with time delay (Models SFIEA, SFIIEA and SFIIIEA)
- High speed rotating nozzle
- Alternate performance ratings (GPM and PSI)
Flow Rate |
5.0 GPM 18.9 LPM |
Pressure |
206.850 BAR 3000 PSI |
Drive Type |
Gasoline Engine |
Voltage / Phase |
Gasoline Engine |
Motor / Engine Power |
18.0 H.P. |
Heat Exchanger Coil |
N/A |
Cold or Hot/Steam |
N/A |
Heating Fuel/Energy Source |
N/A |
Options |
N/A |
Warranty |
Certificate of Limited Warranty |