​​ Tempest Series | Spartan Manufacturing Corporation
Skip To Content
Spartan Manufacturing Corporation
mail_outline spartansales@spartanmanuf.com call
Phone:
336-996-5585
Spartan Manufacturing Corporation Overlay
  • Contact
  • Pressure Washers
    • Hot Water Pressure Washers + Steam Cleaners
    • Cold Water Pressure Washers
    • Custom Designed Cleaning Systems
  • All Products
    • Hot Water Pressure Washers + Steam Cleaners
      • Tempest Series
      • Fury Series
      • Super Fury Series
      • Big Blast Series
    • Cold Water Pressure Washers
      • Aggressor Series
    • Instant Demand Water Heaters
    • Custom Designed Cleaning Systems
    • Waste Water Capture Systems (VacuBoom)
    • Product Options
  • About Us
    • Guide: Hot Water Pressure Washers
  • Contact Us
  • Blog
call 336-996-5585 mail_outline spartansales@spartanmanuf.com search Request Information RFI

Tempest Series

Home > Products > Tempest Series

Tempest Oil Fired Hot High Pressure Washers (Steam Optional)

Tempest Series

8 Standard Models: 5 Electric Motor driven, 3 Engine driven

Tempest series machines are the oil fired equivalent of the propane Fury and Super Fury series. With eight models ranging from 1000 PSI (68.9 bar) to 4000 PSI (275.8 bar), these are powerful units that will handle the toughest and most demanding hot pressure cleaning or steam cleaning tasks with ease. They are equipped with high efficiency flame retention oil burners that can use diesel fuel, kerosene, fuel oil and the most common types of jet fuels. All components are premium heavy duty for reliability, performance and long life.

Of the eight standard models, five have premium efficient electric motor drives three are gasoline engine powered. Optional multiple guns can be used and special controls are available. Phosphatizing and acid injection optional features are available as well as custom ratings of flow rate and pressure.

Tempest models are ideally suited and widely used for challenging industrial uses and contractor applications where mobility is needed and oil fuel is preferred.

High powered cleaning performance in a compact and extremely portable design.

Ruggedly built for long life and reliability.

Designed with engineering excellence and carefully manufactured with the highest quality materials and parts.

Standard Features:

  • Triplex ceramic plunger oil bath pumps
  • Heavy duty American NEMA premium motors
  • High efficiency air atomizing oil burners
  • Schedule 80 ASTM-A53-F steel coils
  • Automatic detergent injection system
  • 50 feet of 3/8″ high pressure hose with trigger gun wand
  • Balanced frame design for ease of movement
  • Easy access for routine servicing
  • Low maintenance design
  • Uses kerosene, No.1 oil, No.2 oil or diesel fuel in heater
  • Chemical and scratch resistant powder coating finish applied over phosphate coating
  • Multiple modes of operation – cold high pressure, hot high pressure and steam (optional)

Options Available:

  • Extra Length pressure hose assembly with quick couplers
  • Special length wands
  • Steam cleaning capability
  • Thermostat control
  • 3-phase electrical system
  • 50-cycle electrical system
  • Wet sandblast system
  • Phosphatizing system
  • Automatic motor shutdown system with time delay
  • High speed rotating nozzle
  • Alternate performance ratings (PSI and GPM)

See Product Options for more information.

Item # TEMPEST IA, Hot Pressure Washer/Steam Cleaner – Oil

Tempest IA

High powered cleaning performance in a compact and extremely portable design.

Ruggedly built for long life an impressive performance.

Designed with engineering excellence and carefully manufactured with the highest quality materials and parts.

Standard Features:

  • Triplex ceramic plunger oil bath pumps
  • Heavy duty American NEMA standard motors
  • High efficiency air atomizing oil burners
  • Schedule 80 ASTM-A53-F steel coils
  • Automatic detergent injection system
  • 50 feet of 3/8″ high pressure hose with trigger gun wand
  • Balanced frame design for ease of movement
  • Easy access for routine servicing
  • Low maintenance design
  • Uses kerosene, No.1 oil, No.2 oil or diesel fuel in heater
  • Chemical and scratch resistant powder coating finish applied over phosphate coating
  • Multiple modes of operation – cold high pressure, hot high pressure and steam (optional)

Options Available:

  • Extra Length pressure hose assembly with quick couplers
  • Special length wands
  • Steam cleaning capability
  • Thermostat control
  • 3-phase electrical system
  • 50-cycle electrical system
  • Wet sandblast system
  • Phosphatizing system
  • Automatic motor shutdown system with time delay
  • High speed rotating nozzle
  • Alternate performance ratings (PSI and GPM)

Specifications

Flow Rate
2.0 GPM
7.5700 LPM
Pressure
68.950 BAR
1000 PSI
Drive Type
Electric Motor
Voltage / Phase
120 V / 1 Ph
Motor / Engine Power
1.5 H.P.
Heat Exchanger Coil
Schedule 80 ASTM A-53 Carbon Steel
Cold or Hot/Steam
Hot Water/Steam
Heating Fuel/Energy Source
Kerosene/Diesel or Oil Fired
Options
  • Automatic Motor Control
  • Auto Shut Off w/Lockout
  • Non USA Standard Voltages/Hertz
  • Hose Reels
  • Stainless Steel Heating Coils
  • 208 volts
  • Water Tanks
  • Multiple Guns
  • Phosphatizing Package
  • Special Controls
  • jet fuel burners
Warranty
Certificate of Limited Warranty
Request for Information

Item # TEMPEST IIA, Hot Pressure Washer/Steam Cleaner – Oil

Tempest IIA

High powered cleaning performance in a compact and extremely portable design.

Ruggedly built for long life an impressive performance.

Designed with engineering excellence and carefully manufactured with the highest quality materials and parts.

Standard Features:

  • Triplex ceramic plunger oil bath pumps
  • Heavy duty American NEMA standard motors
  • High efficiency air atomizing oil burners
  • Schedule 80 ASTM-A53-F steel coils
  • Automatic detergent injection system
  • 50 feet of 3/8″ high pressure hose with trigger gun wand
  • Balanced frame design for ease of movement
  • Easy access for routine servicing
  • Low maintenance design
  • Uses kerosene, No.1 oil, No.2 oil or diesel fuel in heater
  • Chemical and scratch resistant powder coating finish applied over phosphate coating
  • Multiple modes of operation – cold high pressure, hot high pressure and steam (optional)

Options Available:

  • Extra Length pressure hose assembly with quick couplers
  • Special length wands
  • Steam cleaning capability
  • Thermostat control
  • 3-phase electrical system
  • 50-cycle electrical system
  • Wet sandblast system
  • Phosphatizing system
  • Automatic motor shutdown system with time delay
  • High speed rotating nozzle
  • Alternate performance ratings (PSI and GPM)

Specifications

Flow Rate
3.0 GPM
11.355 LPM
Pressure
103.420 BAR
1500 PSI
Drive Type
Electric Motor
Voltage / Phase
230 V / 1 Ph
Motor / Engine Power
3.0 H.P.
Heat Exchanger Coil
Schedule 80 ASTM A-53 Carbon Steel
Cold or Hot/Steam
Hot Water/Steam
Heating Fuel/Energy Source
Kerosene/Diesel or Oil Fired
Options
  • Automatic Motor Control
  • Auto Shut Off w/Lockout
  • Non USA Standard Voltages/Hertz
  • Hose Reels
  • Stainless Steel Heating Coils
  • 208 volts
  • Water Tanks
  • Multiple Guns
  • Phosphatizing Package
  • Special Controls
  • jet fuel burners
Warranty
Certificate of Limited Warranty
Request for Information

Item # TEMPEST IIIA, Hot Pressure Washer/Steam Cleaner – Oil

Tempest IIIA

High powered cleaning performance in a compact and extremely portable design.

Ruggedly built for long life an impressive performance.

Designed with engineering excellence and carefully manufactured with the highest quality materials and parts.

Standard Features:

  • Triplex ceramic plunger oil bath pumps
  • Heavy duty American NEMA standard motors
  • High efficiency air atomizing oil burners
  • Schedule 80 ASTM-A53-F steel coils
  • Automatic detergent injection system
  • 50 feet of 3/8″ high pressure hose with trigger gun wand
  • Balanced frame design for ease of movement
  • Easy access for routine servicing
  • Low maintenance design
  • Uses kerosene, No.1 oil, No.2 oil or diesel fuel in heater
  • Chemical and scratch resistant powder coating finish applied over phosphate coating
  • Multiple modes of operation – cold high pressure, hot high pressure and steam (optional)

Options Available:

  • Extra Length pressure hose assembly with quick couplers
  • Special length wands
  • Steam cleaning capability
  • Thermostat control
  • 3-phase electrical system
  • 50-cycle electrical system
  • Wet sandblast system
  • Phosphatizing system
  • Automatic motor shutdown system with time delay
  • High speed rotating nozzle
  • Alternate performance ratings (PSI and GPM)

Specifications

Flow Rate
4.0 GPM
15.140 LPM
Pressure
137.9 BAR
2000 PSI
Drive Type
Electric Motor
Voltage / Phase
230 V / 1 Ph
Motor / Engine Power
5.0 H.P.
Heat Exchanger Coil
Schedule 80 ASTM A-53 Carbon Steel
Cold or Hot/Steam
Hot Water/Steam
Heating Fuel/Energy Source
Kerosene/Diesel or Oil Fired
Options
  • Automatic Motor Control
  • Auto Shut Off w/Lockout
  • Non USA Standard Voltages/Hertz
  • Hose Reels
  • Stainless Steel Heating Coils
  • 208 volts
  • Water Tanks
  • Multiple Guns
  • Phosphatizing Package
  • Special Controls
  • jet fuel burners
Warranty
Certificate of Limited Warranty
Request for Information

Item # TEMPEST IVA, Hot Pressure Washer/Steam Cleaner – Oil

Tempest IVA

High powered cleaning performance in a compact and extremely portable design.

Ruggedly built for long life an impressive performance.

Designed with engineering excellence and carefully manufactured with the highest quality materials and parts.

Standard Features:

  • Triplex ceramic plunger oil bath pumps
  • Heavy duty American NEMA standard motors
  • High efficiency air atomizing oil burners
  • Schedule 80 ASTM-A53-F steel coils
  • Automatic detergent injection system
  • 50 feet of 3/8″ high pressure hose with trigger gun wand
  • Balanced frame design for ease of movement
  • Easy access for routine servicing
  • Low maintenance design
  • Uses kerosene, No.1 oil, No.2 oil or diesel fuel in heater
  • Chemical and scratch resistant powder coating finish applied over phosphate coating
  • Multiple modes of operation – cold high pressure, hot high pressure and steam (optional)

Options Available:

  • Extra Length pressure hose assembly with quick couplers
  • Special length wands
  • Steam cleaning capability
  • Thermostat control
  • 3-phase electrical system
  • 50-cycle electrical system
  • Wet sandblast system
  • Phosphatizing system
  • Automatic motor shutdown system with time delay
  • High speed rotating nozzle
  • Alternate performance ratings (PSI and GPM)

Specifications

Flow Rate
5.0 GPM
18.925 LPM
Pressure
206.850 BAR
3000 PSI
Drive Type
Electric Motor
Voltage / Phase
230 V / 1 Ph
Motor / Engine Power
10.0 H.P.
Heat Exchanger Coil
Schedule 80 ASTM A-53 Carbon Steel
Cold or Hot/Steam
Hot Water/Steam
Heating Fuel/Energy Source
Kerosene/Diesel or Oil Fired
Options
  • Automatic Motor Control
  • Auto Shut Off w/Lockout
  • Non USA Standard Voltages/Hertz
  • Hose Reels
  • Stainless Steel Heating Coils
  • 208 volts
  • Water Tanks
  • Multiple Guns
  • Phosphatizing Package
  • Special Controls
  • jet fuel burners
Warranty
Certificate of Limited Warranty
Request for Information

Item # TEMPEST VA, Hot Pressure Washer/Steam Cleaner – Oil

Tempest VA

High powered cleaning performance in a compact and extremely portable design.

Ruggedly built for long life an impressive performance.

Designed with engineering excellence and carefully manufactured with the highest quality materials and parts.

Standard Features:

  • Triplex ceramic plunger oil bath pumps
  • Heavy duty American NEMA standard motors
  • High efficiency air atomizing oil burners
  • Schedule 80 ASTM-A53-F steel coils
  • Automatic detergent injection system
  • 50 feet of 3/8″ high pressure hose with trigger gun wand
  • Balanced frame design for ease of movement
  • Easy access for routine servicing
  • Low maintenance design
  • Uses kerosene, No.1 oil, No.2 oil or diesel fuel in heater
  • Chemical and scratch resistant powder coating finish applied over phosphate coating
  • Multiple modes of operation – cold high pressure, hot high pressure and steam (optional)

Options Available:

  • Extra Length pressure hose assembly with quick couplers
  • Special length wands
  • Steam cleaning capability
  • Thermostat control
  • 3-phase electrical system
  • 50-cycle electrical system
  • Wet sandblast system
  • Phosphatizing system
  • Automatic motor shutdown system with time delay
  • High speed rotating nozzle
  • Alternate performance ratings (PSI and GPM)

Specifications

Flow Rate
5.0 GPM
18.925 LPM
Pressure
275.800 BAR
4000 PSI
Drive Type
Electric Motor
Voltage / Phase
230-440 V / 3 Ph
Motor / Engine Power
15.0 H.P.
Heat Exchanger Coil
Schedule 80 ASTM A-53 Carbon Steel
Cold or Hot/Steam
Hot Water/Steam
Heating Fuel/Energy Source
Kerosene/Diesel or Oil Fired
Options
  • Automatic Motor Control
  • Auto Shut Off w/Lockout
  • Non USA Standard Voltages/Hertz
  • Hose Reels
  • Stainless Steel Heating Coils
  • 208 volts
  • Water Tanks
  • Multiple Guns
  • Phosphatizing Package
  • Special Controls
  • jet fuel burners
Warranty
Certificate of Limited Warranty
Request for Information

Item # TEMPEST IVAG, Hot Pressure Washer/Steam Cleaner – Oil

Tempest IVAG

High powered cleaning performance in a compact and extremely portable design.

Ruggedly built for long life an impressive performance.

Designed with engineering excellence and carefully manufactured with the highest quality materials and parts.

Standard Features:

  • Triplex ceramic plunger oil bath pumps
  • Heavy duty American NEMA standard motors
  • High efficiency air atomizing oil burners
  • Schedule 80 ASTM-A53-F steel coils
  • Automatic detergent injection system
  • 50 feet of 3/8″ high pressure hose with trigger gun wand
  • Balanced frame design for ease of movement
  • Easy access for routine servicing
  • Low maintenance design
  • Uses kerosene, No.1 oil, No.2 oil or diesel fuel in heater
  • Chemical and scratch resistant powder coating finish applied over phosphate coating
  • Multiple modes of operation – cold high pressure, hot high pressure and steam (optional)

Options Available:

  • Extra Length pressure hose assembly with quick couplers
  • Special length wands
  • Steam cleaning capability
  • Thermostat control
  • 3-phase electrical system
  • 50-cycle electrical system
  • Wet sandblast system
  • Phosphatizing system
  • Automatic motor shutdown system with time delay
  • High speed rotating nozzle
  • Alternate performance ratings (PSI and GPM)

Specifications

Flow Rate
5.0 GPM
18.925 LPM
Pressure
206.850 BAR
3000 PSI
Drive Type
Gasoline Engine
Voltage / Phase
N/A
Motor / Engine Power
18 H.P.
Heat Exchanger Coil
Schedule 80 ASTM A-53 Carbon Steel
Cold or Hot/Steam
Hot Water/Steam
Heating Fuel/Energy Source
Kerosene/Diesel or Oil Fired
Options
  • Automatic Motor Control
  • Auto Shut Off w/Lockout
  • Non USA Standard Voltages/Hertz
  • Hose Reels
  • Stainless Steel Heating Coils
  • 208 volts
  • Water Tanks
  • Multiple Guns
  • Phosphatizing Package
  • Special Controls
  • jet fuel burners
Warranty
Certificate of Limited Warranty
Request for Information

Item # TEMPEST VAG, Hot Pressure Washer/Steam Cleaner – Oil

Tempest VAG

High powered cleaning performance in a compact and extremely portable design.

Ruggedly built for long life an impressive performance.

Designed with engineering excellence and carefully manufactured with the highest quality materials and parts.

Standard Features:

  • Triplex ceramic plunger oil bath pumps
  • Heavy duty American NEMA standard motors
  • High efficiency air atomizing oil burners
  • Schedule 80 ASTM-A53-F steel coils
  • Automatic detergent injection system
  • 50 feet of 3/8″ high pressure hose with trigger gun wand
  • Balanced frame design for ease of movement
  • Easy access for routine servicing
  • Low maintenance design
  • Uses kerosene, No.1 oil, No.2 oil or diesel fuel in heater
  • Chemical and scratch resistant powder coating finish applied over phosphate coating
  • Multiple modes of operation – cold high pressure, hot high pressure and steam (optional)

Options Available:

  • Extra Length pressure hose assembly with quick couplers
  • Special length wands
  • Steam cleaning capability
  • Thermostat control
  • 3-phase electrical system
  • 50-cycle electrical system
  • Wet sandblast system
  • Phosphatizing system
  • Automatic motor shutdown system with time delay
  • High speed rotating nozzle
  • Alternate performance ratings (PSI and GPM)

Specifications

Flow Rate
4.0 GPM
15.140 LPM
Pressure
241.320 BAR
3500 PSI
Drive Type
Gasoline Engine
Voltage / Phase
N/A
Motor / Engine Power
14.0 H.P.
Heat Exchanger Coil
Schedule 80 ASTM A-53 Carbon Steel
Cold or Hot/Steam
Hot Water/Steam
Heating Fuel/Energy Source
Kerosene/Diesel or Oil Fired
Options
  • Automatic Motor Control
  • Auto Shut Off w/Lockout
  • Non USA Standard Voltages/Hertz
  • Hose Reels
  • Stainless Steel Heating Coils
  • 208 volts
  • Water Tanks
  • Multiple Guns
  • Phosphatizing Package
  • Special Controls
  • jet fuel burners
Warranty
Certificate of Limited Warranty
Request for Information

Item # TEMPEST VAE, Hot Pressure Washer/Steam Cleaner – Oil

Sony Dsc

High powered cleaning performance in a compact and extremely portable design.

Ruggedly built for long life an impressive performance.

Designed with engineering excellence and carefully manufactured with the highest quality materials and parts.

Standard Features:

  • Triplex ceramic plunger oil bath pumps
  • Heavy duty American NEMA standard motors
  • High efficiency air atomizing oil burners
  • Schedule 80 ASTM-A53-F steel coils
  • Automatic detergent injection system
  • 50 feet of 3/8″ high pressure hose with trigger gun wand
  • Balanced frame design for ease of movement
  • Easy access for routine servicing
  • Low maintenance design
  • Uses kerosene, No.1 oil, No.2 oil or diesel fuel in heater
  • Chemical and scratch resistant powder coating finish applied over phosphate coating
  • Multiple modes of operation – cold high pressure, hot high pressure and steam (optional)

Options Available:

  • Extra Length pressure hose assembly with quick couplers
  • Special length wands
  • Steam cleaning capability
  • Thermostat control
  • 3-phase electrical system
  • 50-cycle electrical system
  • Wet sandblast system
  • Phosphatizing system
  • Automatic motor shutdown system with time delay
  • High speed rotating nozzle
  • Alternate performance ratings (PSI and GPM)

Specifications

Flow Rate
5.0 GPM
18.925 LPM
Pressure
275.800 BAR
4000 PSI
Drive Type
Gasoline Engine
Voltage / Phase
N/A
Motor / Engine Power
21 H.P.
Heat Exchanger Coil
Schedule 80 ASTM A-53 Carbon Steel
Cold or Hot/Steam
Hot Water/Steam
Heating Fuel/Energy Source
Kerosene/Diesel or Oil Fired
Options
  • Automatic Motor Control
  • Auto Shut Off w/Lockout
  • Non USA Standard Voltages/Hertz
  • Hose Reels
  • Stainless Steel Heating Coils
  • 208 volts
  • Water Tanks
  • Multiple Guns
  • Phosphatizing Package
  • Special Controls
  • jet fuel burners
Warranty
Certificate of Limited Warranty
Request for Information

Contact Us to Discuss Your Next Project?

Contact Us Now!
Made In USA
Spartan Manufacturing Corporation Thomas
  • Contact Us
  • Sitemap
  • Terms & Conditions
Address: 1536 Brookford Industrial Dr., P.O. Box 917, Kernersville, NC 27284
  • Phone: 336-996-5585
  • Fax: 336-996-6217
  • Email: spartansales@spartanmanuf.com

© 2023 Spartan Manufacturing Corporation, All Rights Reserved  |  Site created by Thomas Marketing Services