Products

If your cold pressure washing application can be handled with lower pressure and flows and/or your power supply is limited to 110 to 120 volts, or your budget is very limited, the Aggressor Series may serve your needs. Even though the Aggressor Series machines have lower flow and pressure outputs, make no mistake. These are rugged industrial grade machines just like all of the larger higher performance units that we manufacture. They are reliable, durable and long lasting. The Aggressor Series models are frequently used in industrial and commercial cleaning environments for vehicle washing, concrete surfaces and other light or moderate tasks. They can easily be wall mounted and take up little floor space when used or stored. Cold water high pressure washers are best suited to applications involving the removal of dirt and grime which does not contain substantial amounts of grease or oil. Also removal of hard deposits benefit from the blasting and cutting effect of high pressure cold water. With the aid of detergent chemical, cold pressure washers can be used for removal of dirt and grime containing small to moderate amounts of oil and grease. For this propose, all Aggressor models are standard equipped with easy to use detergent chemical injection systems. For removing heavy amounts of oil and grease or for softening heat reactive substances, it is usually best to use hot high-pressure/steam. See Fury Series, Super Fury Series, Tempest Series or Big Blast Series For additional information and detailed specifications, go to Aggressor Series

Big Blast Series machines are the stationary equivalent of both the Super Fury series of mobile propane units and the Tempest series of mobile oil fired units. With sixteen models available ranging from 1000 PSI (68.9 bar) to 4000 PSI (275.8 bar) these are the industry standard for handling rugged and demanding industrial or commercial applications where mobility is not a requirement. Big Blast models are available for using natural gas, propane, diesel fuel, kerosene, heating oil or jet fuel. All premium heavy duty components are used to ensure reliability, durability and long life. Big Blast machines can be used in a variety of ways including, but not limited to single hose and gun, multiple hose and gun, single hose and gun with remote control station, multiple hoses and guns with multiple control stations, central location with piping distribution system throughout buildings, modular units, high flow rate systems (GPM), phosphatizing, alkaline or acid injection and multiple chemical feeds. Big Blast stationary units are typically used in manufacturing plants, and commercial facilities of all types. In manufacturing plants these units are used for maintenance activities or production parts cleaning. They can be run 24/7 under demanding conditions and can be interfaced with existing production controls. For additional information and detailed specifications, go to Big Blast Series

The Bigfoot-E Series are powerful, rugged, industrial duty cold high pressure washers that are designed and built for the most demanding industrial and commercial applications. All components are premium heavy duty for reliability and long life. Ten standard models are available ranging from 1500 PSI (103.4 bar) to 5000 PSI (344.75 bar) with flow rates from 3 GPM (11.3 LPM) to 5 GPM (18.9 LPM). All models are on wheels for mobility, but are also optionally available with stationary mount frames and/or wall mounting. Bigfoot-E Series machines can be equipped with multiple guns, remote control stations, special automatic controls and many other optional features. Go to Product Options. Bigfoot-E Series machines can also be used with demand heater modules for hot high pressure washing or steam cleaning. Go to PRO-Line Demand Heater Modules for more information. If your initial requirements are for cold high pressure cleaning with possible later converting to hot high pressure or steam cleaning, starting with a Bigfoot-E Series machine and later adding a demand heater module is a very cost effective way to go. Bigfoot-E Series machines are frequently used in industrial process applications like supplying fixed nozzles mounted on a conveyor to clean manufactured products or components traveling on a conveyor line. Remote control signals from production can be used. These machines are capable of continuous 24/7 use. Bigfoot-E Series machines can be specified and quoted for special flow rates and pressures for virtually any application. For more information go to Custom Designed Cleaning Systems. Cold water high pressure washers are best suited to applications involving the removal of dirt and grime which does not contain substantial amounts of grease or oil. Also removal of hard deposits benefit from the blasting and cutting effect of high pressure cold water. With the aid of detergent chemical, cold pressure washers can be used for removal of dirt and grime containing small to moderate amounts of oil and grease. For this purpose, all Bigfoot-E models are standard equipped with easy to use detergent chemical injection systems. For removing heavy amounts of oil and grease or for softening heat reactive substances, it is usually best to use hot high-pressure/steam. See Fury Series, Super Fury Series, Tempest Series or Big Blast Series For additional information and detailed specifications, go to Bigfoot-E Electric Motor Series

The Bigfoot Series machines are compact and mobile, yet powerful cold water engine driven high pressure washers. Five models are available ranging from 2000 PSI (137.9 bar) to 5000 PSI (344.75 bar). Four models are powered by efficient OHV gasoline engines with the 5000 PSI model available with a propane engine or diesel engine. These machines are not homeowner or light duty contractor models as commonly found in retail outlets. They are rugged industrial grade units perfectly suited to the most demanding industrial, commercial and contractor applications. All components are premium heavy duty for reliability and long life. Cold water high pressure washers are best suited to applications involving the removal of dirt and grime which does not contain substantial amounts of grease or oil. Also removal of hard deposits benefit from the blasting and cutting effect of high pressure cold water. With the aid of detergent chemical, cold pressure washers can be used for removal of dirt and grime containing small to moderate amounts of oil and grease. For this propose, all Bigfoot models are standard equipped with easy to use detergent chemical injection systems. For removing heavy amounts of oil and grease or for softening heat reactive substances, it is usually best to use hot high-pressure/steam. See Fury Series, Super Fury Series, Tempest Series or Big Blast Series For additional information and detailed specifications, go to Bigfoot Series

The Fury Series machines are compact highly mobile units that use propane or butane fuel to produce wet steam at up to 300 ºF or hot high pressure water up to 200 ºF. They feature stainless steel heating coils, full range temperature control from ambient to 300 ºF, advanced electronic DSI ignition and safety controls to provide responsive, reliable and highly effective cleaning performance. They are fueled from a portable refillable propane tank that mounts on the machine frame. All components are premium heavy duty for reliability and long life. There are four Fury models ranging from 750 PSI (51.7 bar) to 2000 PSI (137.9 bar) with flow rates from 1.4 GPM (5.3 LPM) to 2.8 GPM (10.6 LPM). Fury machines operate on single phase electric power with two 110 V-120 VAC models and two 220-240 VAC models. Fury machines are ideally suited and widely used for medium to heavy duty steam cleaning or hot pressure washing in industrial plants, or food service and processing facilities and all types of commercial businesses. Clean burning propane fuel allows these models to be used indoors in many applications. For additional information and detailed specifications, go to Fury Series.

Super Fury Series machines are the big brothers of the Fury Series. With six models ranging from 2000 PSI (137.9 bar) to 4000 PSI (275.8 bar), these powerful units will handle the toughest and most demanding hot pressure cleaning tasks or steam cleaning tasks with ease. They are equipped with advanced electronic DSI ignition and control systems with full safety controls and full time burner supervision. All components are premium heavy duty for reliability and long life. Of the six standard models, three feature premium efficient electric motor drives and three are powered by specially designed heavy duty electric start propane fueled engines. Super Fury machines are ideally suited and widely used for challenging industrial uses and contractor applications. Optional multiple guns can be used and special controls are available. Phosphatizing and acid injection optional features are available, as well as custom ratings of flow rate and pressure. For additional information and detailed specifications, go to Super Fury Series

Tempest Series machines are the oil fired equivalent of the propane fired Fury and Super Fury series. With eight models ranging from 1000 PSI (68.9 bar) to 4000 PSI (275.8 bar), these are powerful units that will handle the toughest and most demanding hot pressure cleaning or steam cleaning tasks with ease. They are equipped with high efficiency flame retention oil burners that can use diesel fuel, kerosene, fuel oil and the most common types of jet fuel. All components are premium heavy duty for reliability, performance and long life. Of the eight standard models, five have premium efficient electric motor drives, three are gasoline engine powered. Optional multiple guns can be used and special features are available, as well as custom ratings of flow rate and pressure. Tempest models are ideally suited and widely used for challenging industrial uses and contractor applications where mobility is needed and oil fuel is preferred. For additional information and detailed specifications, go to Tempest Series